Freedom Recovery Gear Ltd
Van Beest Green Pin® Bow Shackle for 4WD Recovery
Van Beest Green Pin® Bow Shackle for 4WD Recovery
Couldn't load pickup availability
Van Beest Green Pin® Screw-Pin Bow Shackle for 4WD Recovery
Add a Van Beest Green Pin® Bow Shackle to a compatible 4WD recovery setup. Its screw-collar pin allows for quick assembly and removal, while the bow-shaped design accommodates compatible recovery connections.
Working Load Limit (WLL) varies by shackle size. Always use the WLL marked on the specific shackle and confirm it is suitable for every component in your recovery system.
FEATURES
- Van Beest Green Pin® Bow Shackle SC
- Bow and pin made from quenched-and-tempered, high-tensile Grade 6 steel
- Screw-collar pin for quick assembly and removal
- Hot-dip galvanized finish
- 6:1 design factor (Minimum Breaking Load equals 6 times the WLL)
- Available in selected sizes; ratings vary by model
SIZE AND FITMENT GUIDANCE
The 3/4-inch Green Pin® Bow Shackle SC has a 4.75-ton WLL and is a common size for 4WD recovery. if you have an AEV 3/4 ton Prospector number you'll need The 7/8-inch size which has a 6.5-ton WLL and is listed as an option for 1-ton dual-wheel vehicles. These are general size guides—not a substitute for checking the shackle’s marked WLL, the vehicle’s rated recovery points, and the ratings of all other system components.
MBS AND WLL DEFINITIONS
MBS means Minimum Breaking Strength: the lowest amount of force or load a product or component can withstand during controlled laboratory testing before it structurally breaks or fails.
WLL Means Working Load Limit: is the maximum safe load that a piece of rigging equipment is designed by the manufacturer to handle during normal use. It is much lower than the force required to make the equipment fail or yield.
SAFETY
- Inspect the shackle, pin, threads, and markings before use. Do not use damaged, deformed, excessively worn, corroded, or unmarked gear.
- Make sure the body and pin are the same size, type, and make. Do not substitute a different pin.
- Fully seat the screw pin and follow the manufacturer’s instructions for use.
- Keep the load aligned through the shackle. Avoid side loading and configurations that could cause the pin to loosen.
- Do not shock load or use for kinetic or snatch recovery.
- Never exceed the shackle’s marked WLL or the rating of any other component in the recovery system.
- If you are not trained to use recovery equipment, seek instruction from a qualified professional before use.
ADDITIONAL INFORMATION
- Finish and color may vary.
- Specifications are subject to change without notice.
CALIFORNIA PROPOSITION 65 WARNING
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
Share
