7/16" TuFF-X Pro Synthetic Winch Line Extensions MBS 23,500 lbs

TuFF-X Pro 7/16-Inch Synthetic Winch Line Extension – 23,500 lb MBS

Extend the reach of a compatible winch line with a TuFF-X Pro 7/16-inch synthetic winch line extension. Choose the length that suits your setup and confirm the extension, winch line, connections, and recovery points are compatible and properly rated.

RATINGS AND OPTIONS

- Diameter: 7/16 inch
- Minimum Breaking Strength (MBS): 23,500 lb
- Working Load Limit (WLL): 4,700 lb
- Design factor: 5:1
- Standard lengths: 12, 40, 80, and 100 ft
- Custom lengths available by request

MBS AND WLL DEFINITIONS

MBS means Minimum Breaking Strength: the lowest amount of force or load a product or component can withstand during controlled laboratory testing before it structurally breaks or fails.

WLL Working Load Limit: is the maximum safe load that a piece of rigging equipment is designed by the manufacturer to handle during normal use. It is much lower than the force required to make the equipment fail or yield.

The WLL shown is based on the 5:1 design factor: 23,500 lb MBS ÷ 5 = 4,700 lb WLL.

SAFETY

- Inspect the extension before each use. Do not use it if cut, frayed, abraded, contaminated, heat-damaged, or otherwise compromised.
- Protect synthetic line from sharp edges and abrasion. Use suitable edge protection where needed.
- Use only with compatible, properly rated equipment and connection points.
- Do not exceed the WLL or the rating of any component in the recovery system.
- Do not shock load or use for kinetic or snatch recovery.
- If you are not trained to use recovery equipment, seek instruction from a qualified professional before use.

ADDITIONAL INFORMATION

- Custom lengths are available by request.
- Specifications are subject to change without notice.

CALIFORNIA PROPOSITION 65 WARNING

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov