Freedom Recovery Gear 11′ Straps MBS 48,000 Lbs (BF special while supplies last)

This Mammoth 2 play extreme Duty Nylon Freedom Recovery Gear Straps is proudly manufactured in Canada from Canadian webbing.

Manufactured and rated by a company that specializes in making straps for the rigging industry, and not he recreation off-road market, you know these straps are going to be up to the task with extra heavy duty reinforced eyes.

this is a monster strap  Minimum Break Strength of 48,000 pound based on destructive testing as assemblies and not a calculation, these straps come with realistic ratings. The Manufactures label specifies all the details you need to know when rigging, if you gear doesn’t come with a label how will you remember what is rated for?

Freedom  Recovery Strap is specifically designed for minimal stretch under load for maximum performance,

We’ve chosen 3”  width and used 2 plys in high visibility Orange for great visibility

With  MBS of  48,000 lbs This strap size is appropriate for a vehicles Up to Dually up to 14,500 lbs GVWR

Our Tree Savers are also available in both 15’, and 8’ in single ply for Half ton class vehicles.

Please always read the label on your strap for proper ratings.

• CAUTION
• Avoid abrasive surfaces and any sharp edges.
• Make Sure your Attachment point is capable of holding the load you will place on it.
• Always Visually Inspect your rope and spliced eyes before use and during attachment to each vehicle.
• Use shackles of an appropriate strength for the rope and consider switching to soft shackles ( Low Mass ) for increased safety.
• Test before use. Try light pulls to test attachment before pulling at maximum force.
• Crawl (tractions extraction), walk (2-3 mph), Run 4-5mph)  with no more than 6’ of slack
• Keep spectators out of the tow zone 1 ½ times farther than the strap can reach.
• do not tie a knot, A knot can reduce a rope’s strength by as much as half.*

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov